Our graphics really take flight

Window Perfs

Window perf is a calendared adhesive-backed PVC vinyl that is perforated with a pattern of round, evenly spaced holes. The advantage of window perf is that it allows graphics printed on a glass surface, such as windows, to be seen from the outside, but appear invisible to the people inside looking out. Window perf is sometimes called “see-through vinyl,” or “one-way vision film,” but the basic concept is the same.

In most cases the actual size of the holes are uniform (usually about 1.5mm). It’s the distance between the holes that determines the print coverage vs. visibility. For example, 50/50 window perf film means that 50 percent of the material is printable area and 50 percent is perforation. Window perf comes in a number of different hole configurations; 50/50, 60/40 and 70/30 are the most common. The first number in this designation represents the amount of printable area and the second number represents the amount of open (see-through) area. Therefore, a 70/30 window perf has a larger printable area, but less see-through area, than a 50/50 window perf.

Film Construction and Applications

Window perf is made in layers. The first (top) layer is the white vinyl that is printable, the next layer is black vinyl, followed by an adhesive coating and finally the release liner. The black layer acts as an optical illusion that allows clear visibility from behind the printed vinyl, but works best when you have 70 percent or more of the light on the printed side.

Typical applications for window perf include vehicle windows (side and rear), exterior edifice glass (i.e. building wraps), retail window displays, and any situation where you want a graphic to be seen from one side, but not from the other. Vehicles are by far the most common use for window perf, but building wrap windows are very common in places such as Las Vegas.

In most applications that are not vehicle related, you would not typically laminate the window perf. However, for vehicle applications some people laminate and some don’t. This is a choice you should research for your particular application, and decide what is best for your clients.
Some people think you can use window perf to separate two rooms that are divided by glass—like a conference room with glass walls. However, you generally cannot achieve privacy in the room with window perf because the amount of light is typically the same inside and outside the glassed-in room. If the amount of light inside the room is greater than outside, then the film will appear more or less invisible.

What’s New?

The challenge for many shops is to find a window perf product that can be easily installed on the inside of the glass. Years ago 3M introduced a product for the Scotchprint 2000 electrostatic printing system where you could transfer the image onto a special perforated vinyl that had the adhesive on the face of the clear film. This allowed the digital print market to offer a reverse-mount window perf product.

Today, Contra Vision offers an inside-mount perforated film called TT. It consists of black on white backing layers, and is a thermal transfer product that enables see-through window graphics for application to the inside of a window. The material is self-wound with the coating on the inside. The coating is transferred to a reverse-imaged, clear perforated material by a heated roller laminator and the liner is removed so that, when applied to a window, the image is visible right-reading from the outside and the black faces inside for good through vision. Interior-mount window perf employing similar mounting concepts are starting to become more readily available. Check with your preferred window perf manufacturer to see if they also offer this type of film.